Project 1 [ Filler ]
Initially, the Customer wished to double a filler feed screw, currently conveyed by a single rigid screw, in order to double or divert the flow of recovered material under a drum dryer. ATEX Zone 2
Project 2 [ PEP ]
After a successful project, the Customer wanted to further improve the working conditions of its operators (ergonomics and safety) by installing a new automatic transfer line for its iron oxide. Healthy zone
Our customer wanted to be able to easily move and store his boric acid powder conveying system. It was also important for him to be able to recover a maximum of residual product remaining at the bottom of the tank in order to avoid as much as possible a discharge to the environment.
The customer wanted to transport 2 materials, to 2 different locations
The Customer wanted to transport a very wet material - close to molasses consistency, from a big-bag station to 3 buffer tanks at 4, 5 and 10 meters respectively.
Amberlite resin
The Customer had a 1500L tank located in their building, with a transfer line for their product A (SBS), with a flow rate of 16m3.
A rigid screw passed through the wall of this building to feed a silo located outside. From this silo a mixer was fed.
Total distance from the ground was 18 metres.
In the manufacturing process, the SBS throughput had to be doubled and product B (Sulphur) had to be added in a defined quantity and at a precisely defined rate.
Multi-product transfer from a bagging station