The Transitube: a system as simple as it is effective
The Transitube system is designed to transfer powders and aggregates of various behaviours, grain sizes and densities.
It is robust, flexible and watertight, and is ATEX-qualified in design and in the workshop.
It preserves the integrity of the transported material in both its form and its mixture.
At the heart of a complete solution, consisting of big-bag emptying stations, bag emptying hoppers, mixers, etc., it is composed of a large helical spring called a "spiral", rotating in a tube made of polyamide, stainless steel or special anti-abrasion material.
Depending on the material to be conveyed and the flow rate requirements, Transitube systems offer a wide range of coils and tubes.
The benefits of Transitube
Agile
It is flexible and can be adapted to any layout configuration and equipment.
- Long distance and vertical elevation (up to 90°),
- Small footprint,
- Go around obstacles (curves),
- Mobile structure,
- Quick disassembly.
Effective
It transports all kinds of powders and aggregates.
It respects the integrity of the products and the homogeneity of the mixtures.
- Starts under load,
- Meets large flow requirements [up to 20M3/h per screw] ...
For different processes, in continuous or batch mode.
Secure
ATEX Category 1 equipment by Type Examination Certificate and Workshop Quality Assurance System.
- Approved for indoor zone 20,
- Integrates inerting solutions,
- Waterproof inside/outside,
- No air is added,
- Replaces operator fatigue and limits MSD factors.
Econome
- No maintenance downtime,
- Very little preventive maintenance,
- Low power consumption,
- Robust/permanent,
- An important lever for productivity.
Service
- Feasibility study,
- Study and layout,
- Dedicated project team,
- Complete technical file in 3 languages,
- Machine / parts / layout drawings,
- 12 months warranty,
- Assembly/support,
- Electrical cabinet/automation,
- MSI & user training
QWL
- Reduces drudgery and MSD risks,
- Eliminates dust flying.
- Peu bruyant (< 80 db)
Technical characteristics of our systems
- Flexible - soft - bendable
- Anti-clogging, anti-static
- 100% biobased tubes
- Anti-retention
- Quick disassembly
- Waterproof indoor/outdoor
- Category 1D/2GD equipment (ATEX zones 22, 21 and 20 indoors)
- Bending radius up to 2.5 meters
- Flow rate up to 20m3/h
- Single length up to 20 meters then in relays
- Different coil profiles: flat, round, square, brush
- Diameters from 39 mm to 140 mm
- Speeds up to 1,500 rpm