Flexible mechanical conveyor: an efficient way to reduce your costs

Your operator, with his bag on his shoulder, walks painfully around the factory, in order to transport the material from point A to point B?

At home too, the dust flying out when emptying the bag is a problem, which can cause respiratory discomfort, nasal lesions... ?

Does your operator sometimes have to twist and turn to get into tight or cramped places?

The flexible mechanical conveyor, also called endless screw, transitube or flexible screw, can convey all types of powders and aggregates, over long distances (in length as well as in elevation), while having a small footprint thanks to its flexible screw.

The flexibility of this mechanical conveyor allows it to adapt toall particle sizes, regardless of the environment and the behavior of the material.

Thanks to the different options available (hoppers, dusting cabin, skid-mobile...), it is possible to transport the material to different locations without to different locations without the need for other dedicated systems.

Flexible mechanical conveyor for easy installation
Flexible mechanical conveyor for easy installation

... But the flexible mechanical conveyor also saves money!

 

Initial costThe flexible screw is the most economical powder conveying system compared to other systems with the same function: pneumatic conveying, bucket elevators, Archimedes screw...

 

Installation costThe Transitube is flexible enough to be installed in any industrial configuration and can be adapted to the existing layout, regardless of the angle, elevation, etc. As a result, installation costs are reduced, as is the space occupied in your plant.

 

Energy costThe flexible screw is known for its low energy consumption thanks to the appropriate choice of motors / geared motors.

Almost 70% of the total electricity consumed in industry is absorbed by electric motors. All motors used by Transitube are classified as IE3, "premium efficiency" (IEC/EN 30034-30 standard) and therefore guarantee maximum energy utilization.

 

Cleaning costThe ease of cleaning induces a minimum of working time and downtime. Indeed, it is enough to remove the cap to access the flexible screw in order to :

  • To evacuate the material

  • Rinse the inside of the tube and/or the screw

  • Remove the screw if necessary to disinfect it

     

Maintenance costEasy to dismantle (screws in a tube), the Transitube does not require downtime for maintenance.

 

Share :

Other articles